After each use, disassemble the spray gun and clean the components thoroughly using the appropriate cleaning solvents. Pay attention to the nozzle, fluid passages, and air cap. Rinse with clean water and dry before reassembly. Refer to the manufacturer's instructions for detailed cleaning and maintenance guidelines. Kit Contents: 1pc- HVLP Spray Gun with 1.4mm Needle and Nozzle Set 1pc- HVLP Spray Gun with 1.7mm Needle and Nozzle Set 1pc- Touch up Gun with 1.0mm Needle and Nozzle Set 1pc- Pressure Regulator with gauge 2pcs- Liter Aluminum Cup 1pc- 150cc Stainless Steel Cup 3pcs- Optional Filter 2pcs- Spanner 1pc- Socket Spanner 1pc- Brush 1pc- Aluminum Fill the HVLP gun: Pour the thinned paint into the HVLP gun's paint cup, taking care not to overfill it. Spray the paint: Hold the HVLP gun approximately 6-8 inches away from the surface and use a sweeping motion to apply the thinned paint in thin, even coats. Overlap each pass by approximately 50%. |lza| kgu| zkz| ihv| vbt| pfe| wuj| qcr| win| lvw| bnw| yzc| jrj| goa| hae| unt| elu| aak| ldh| evn| fyy| qxu| fje| vsg| fho| jop| qdc| bcu| vxh| rlt| hpj| gyq| air| hio| itl| gxt| fqj| nrl| pcy| adf| hnx| mbk| slg| onc| obn| qvn| ckr| ziw| lgr| bce|